Dia 13mm stand up pouch spout and liquid food pouch caps, plastic spout caps for cosmetics product

Introduction

For the (HL130D), it can be applied to all kind of liquid or semi-liquid products of different industries ,they are often welded together with standing pouch packaging to form spouted pouch packaging with a capacity of 300ml-1000ml.

Technical Parameters

Characteristic of stand up pouch spout and liquid food pouch caps (HL130D)

1.This item of spout cap is suitable for juice and beverage, food condiment, personal care and hygiene, cosmetics, chemical products, detergent and home care products etc liquid or semi-liquid products.

2.The spout and cap can be supplied either separated or pre-tightened, depending on the type of packaging machine used by the customer.

3.To use, squeeze the main body of the packaging bag to dispense/pour/suck these product from the 13 mm spout opening; when not in use, tighten the cap.

4.When the contents are cosmetic products/personal care and hygiene products/chemical products/detergent and home care products, the PE is a modified material; when the contents are food and beverage products, the PE is a material that can withstand hot filling at 100 degrees Celsius and pasteurization at 90 degrees Celsius.

5.This spout and caps are only compatible with doypack with top spout or corner spout pouch.

How can the plastic spout caps for cosmetics product (HL130D) be assembled into a spouted pouch packaging?

Method 1: Weld to a standing pouch packaging and assemble into a pre-made spouted pouch packaging(spout and cap can be only at a separated state).

Method 2: Use “rollstock + form/fill/seal machine for spouted pouches + automatic welding of the spout and cap” to assemble finished spouted pouch packaging(spout and cap can be only at a pre-tightened state).