Dia 1.8mm plastik spout assembled with spout pouch caps, plastic screw cap spout for cosmetic

Introduction

For the HL018L, it is widely applied to the cosmetic products,they are often welded together with 4 side seal sachet or sachet doypack to form small spout packet with a capacity of 10gram-50 gram.

Technical Parameters

Characteristic of plastik spout assembled with spout pouch caps (HL018L)

1.This item of spout cap is specifically tailored for cosmetic products such as hand creams/lotions, skin care creams, and lotions etc.

2.The spout and cap can be only supplied a originally integrated state, meaning that the connection point between the spout and cap must be twisted off to separate them before use.

3.When using, the consumer can rotate it backwards to twisted off the connection point between the spout and cap, dispensing these products as needed from the 1.8mm spout orifice by squeezing the pouch body. When not in use, twist the cap tightly to close.

4.The spout and caps are generally made of modified PE (polyethylene) to against acid and alkali.

How can the plastic screw cap spout (HL018L) be assembled into a spout packet?

Use “rollstock + form/fill/seal machine for spouted pouches + automatic welding of the spout and cap” to assemble finished spout packet

Would you like more information or a quote for Product plastik spout assembled with spout pouch caps (HL018L)? Please contact us directly.